Pages

Sunday, July 5, 2015

Christmas In July! {Poinsettia Table Topper}

Hi there! We are kicking off our annual Christmas in July series today! I am so excited to share all of the fun projects with you from the most fabulous and creative ladies!


Here is our schedule for the coming month: 

Today we are kicking things off with My Quilt Infatuation!

Hello, friends!  I'm Kelly, and I am so thrilled to kick off the Christmas in July project series!  I'm a modern quilter, blogger, pattern designer, wife, mom, and former teacher.  I wear lots of hats, as I know many of us do, and my blog home is My Quilt Infatuation.  I'm so excited to share my Poinsettia Table Topper using Kate Spain's brand new Christmas collection, Jingle!


I absolutely love Kate Spain fabric, and this line is no exception.  The colors and prints are classic, but they feel very fresh and modern.  They're clearly Christmas prints without being overly kitschy.




For this project you will need four different prints, plus backing and binding fabric.  I love fabric variety, so I used two different prints from the collection for a total of six prints.

To make this Poinsettia Table Topper, you will need-

1/3 yard- Jingle Incline Multi (binding)

Cutting your fabric-

Centers of flowers-
from 1/8 yd. Jingle Birds and Berries Snow, cut 
(4) 4.5 inch squares

Primary petals-
from 1/2 yard Jingle Noel Crimson, cut 
(16) 4.5 x 6.5 inch pieces

Secondary petals- 
from 1/2 yard Jingle Winter Wishes, cut 
(16) 2.5 x 4.5 inch pieces
(16) 2.5 x 6.5 inch pieces

Leaves-
from 1/3 yard Jingle Holly Cedar, cut 
(16) 4.5 inch squares 
(48) 1.5 inch squares

Background-
from 3/8 yard background fabric, cut
(64) 2.5 inch squares
(32) 1.5 inch squares
(2) 1.5 x 16.5 inch sashing strips
(1) 1.5 x 33.5 inch sashing strip

Okay!  Let's make the blocks!  This project is made from four blocks, and although it seems like a lot of pieces, they go together pretty quickly- I promise!

Each block requires-
(1) 4.5 inch center square
(4) 4.5 x 6.5 inch primary petals
(4) 2.5 x 4.5 inch secondary petals
(4) 2.5 x 6.5 inch secondary petals
(4) 4.5 inch leaves
(8) 1.5 inch leaf squares
(16) 2.5 inch background squares
(12) 1.5 inch background squares



This block requires corner to corner sewing, which can be done with a few different methods.  Some people like to draw a line on the back of each square, and some prefer to use a piece of painter's tape on your sewing machine and table to use as a guide.  Personally, I like to throw caution to the wind and just eyeball it.  Since these pieces are small, they are easy to keep aligned.

Now, I think it goes faster to piece this block in stages, working on one part for the whole block instead of running back and forth to my ironing board fifty times.  So, start by sewing four of the small leaf print squares to each corner of the center square.  This center square is a great place for fussy cuts, but I didn't take it that far.  I did, however, make sure that each center square had a little cardinal in it somewhere.



Then, sew two 1.5 inch white squares on one end, and two 1.5 inch leaf print squares to the other end of the primary petals as shown.  Go ahead and make all four of these!



Divide the secondary petals in half.  Each set should have (4) 2.5 x 4.5 inch pieces, and (4) 2.5 x 6.5 inch pieces.  You'll see why this is important in the next step.  Take one set of secondary petals and sew 2.5 inch squares to the narrow sides as shown by the arrow.



Okay, take special note of this next part because it's important- With the second set, sew 2.5 inch squares in the other direction.  I added arrows to my pictures to make sure this is very clear.



The final bit of corner to corner sewing is the leaves.  Sew the last two 2.5 inch squares to opposite sides of the leaf print.  You'll need to make four of these.


Now for the trimming.  This part is easy peasy!  Just trim the excess fabric 1/4 inch from each seam.  like this-





I know it seems like a ton of those little corners, but they go quickly when you get into it.  You can see how much slower it would be if you took each piece to the ironing board separately though, right? Now that they are all sewn and trimmed though, one trip to the iron is all you need.  Give those corners a press.  



Time to create the corner units!  This includes the leaves and secondary petals.  Sew two corner units like this-



and the other two like this-



This is why sewing the secondary petals in opposite directions was so important earlier.  This allows you to create two of the corner units and the other two with a mirror image.  I think keeping the longer dark red pieces aligned makes the finished block look more polished.



Once you're at this stage, the rest is a breeze!  Just lay out your block, and sew it together like a nine patch block!



Voila! A beautiful poinsettia block, measuring 16.5 inches (16 inches finished).  Trim to 16.5 inches if needed.



Once you have all four of your blocks put together, join them together in pairs, using the short sashing strips.



And join the pairs together using the long sashing strip.  After that, just quilt and bind as desired, and enjoy!  This little quilt finishes at 33 inches, so it's a perfect size for a table centerpiece, or even to hang on the wall.  I love the shape created by the negative space between the blocks.  It's almost like a snowflake!


I hope you enjoy making this project as much as I loved creating it, and I hope you'll hop over and say hello to me at my blog home, My Quilt Infatuation!











Thanks Kelly for the most lovely Table Topper! You can find Kelly:

12 comments:

Karen said...

Very pretty. Thanks for the great tutorial.

Needled Mom said...

That is lovely and those fabrics are perfect for it.

Joyce Carter said...

The fabrics are perfect for Kelly's topper. It looks like Christmas without looking too Christmacy. Very pretty.

Lee said...

I love the design and fabric! thank you for a wonderful tutotial!

Melanie said...

Love your table topper and tutorial!!!

Joan said...

Beautiful table topper and excellent tutorial! I'm going to hop over to your blog. Thank you!

amy said...

Very pretty and great tutorial!

Christine S said...

Thanks so much! Very pretty :)

Jackie said...

Gorgeous! Thank you for the tutorial....

patchworkbreeze said...

I am truly going to enjoy making a table topper with this pattern. Please tell Kelly it is a great pattern and tutorial.

Kathy H said...

Beautiful topper and your directions were so clear and helpful.

Rachell said...

Oh my goodness, I need to make this! I adore Kate Spain, fabrics, too!

Post a Comment