Pages

Wednesday, July 8, 2015

Christmas Pillow Tutorial

Hi there! Today, Andy from A Bright Corner is stopping by to share this lovely Christmas Pillow with us! I have been following Andy on Instagram for a while now and I love her quilting style.  Be sure to stop by her blog and Instagram to check out her lovely work!



Hi everyone!  My name is Andy Knowlton and I blog at abrightcorner.com. I’ve been blogging for about seven years and I also design quilt patterns.  You can find me most days on Instagram (abrightcorner), but if you’re more of a facebook person you can find me there too!


I love decorating my home for Christmas and quilted throw pillows are a great way to add color to your decor.  I keep the same size pillows on my sofa all year round, and just swap out the pillow covers.  It doesn’t take a lot of space to store the 3 or 4 Christmas pillow covers and it’s so fun to switch all of the pillows out several times a year.


Christmas pillow tutorial 2
This pillow tutorial makes a cover for an 18” pillow form.  Here’s what you’ll need to make your own!



Fabric Requirements:



Christmas pillow tutorial 3
Cutting:
From the Postcards for Santa print cut:
1 @ 6.5” x WOF. Subcut 4 @ 6.5” square
2 @ 12.5” x 18.5” for the pillow back
From the red print cut:
1 @ 6.5” x WOF.  Subcut 1 @ 6.5” square, 4 @ 4.25” square and 4 @ 3.5” square.
2 @ 2.5” x WOF.  Set aside to use for pillow binding
From the solid white cut:
1 @ 4.25” x WOF.  Subcut 4 @ 4.25” square and 2 @ 3.5” square.
1 @ 3.5” x WOF.  Subcut 10 @ 3.5” square.

Now let’s get started!
Christmas pillow tutorial 4
Step 1:  On the four white 4.25” squares, draw a diagonal line from corner to corner with a pencil.
Christmas pillow tutorial 5
Step 2:  Place each 4.25” white square, right sides together with  a 4.25” red print square.  Sew about 1/4” on each side of the drawn line.

 Christmas pillow tutorial 6

Step 3:  Carefully cut along the drawn line.  Press the half square triangles (HSTs) open with the seam allowance toward the print side.

Christmas pillow tutorial 8
Trim each HST to be 3.5” square.  Repeat to make 8 total (3.5”) HSTs.
Christmas pillow tutorial 9

Step 4: Use one 3.5” white square, one 3.5” red square and two of the half square triangles (HSTs) to create a corner block unit as shown in the diagram below.
Corner block diagram

Repeat to make four of these corner block units.
Christmas pillow tutorial 16

Christmas pillow tutorial 10
Step 5:  On 8 of the 3.5” white squares, draw a diagonal line from corner to corner with a pencil.
Christmas pillow tutorial 11
Step 6:  Place one 3.5” white square on one corner of a 6.5” main print (Postcards for Santa) square. 
Christmas pillow tutorial 12
Sew right on the drawn line.  Trim about 1/4” away from stitching.
Christmas pillow tutorial 13
Fold open the corner and press.

Christmas pillow tutorial 14
Step 7:  Place a second 3.5” white square on an adjacent corner of the 6.5” main print square.  Sew on the drawn line.  Trim about 1/4” away from seam.

Christmas pillow tutorial 15
Fold open the corner and press.  Repeat to make four of these from the 6.5” main print (Postcards for Santa) squares.


Christmas pillow tutorial 21
Step 8:  Lay out block sections as shown.  Sew into rows using a 1/4” seam.  Press seams of row 1 and 3 towards the center.  Press the seams of row 2 away from the center.   Sew rows together, matching seams.  Press. 

Christmas pillow tutorial 22
Step 9:  Layer the 19” square piece of muslin, the thin batting, and then the pillow top (right side up).  Quilt as desired.  Then trim the edges of the lining and batting to be even with the pillow top (should be 18.5” x 18.5”).

Christmas pillow tutorial 31
Step 10:  Find the 12.5” x 18.5” pillow back pieces.  On one long edge of both pieces, fold under 1/2” and then again another 1/2”.  Press well. 

Christmas pillow tutorial 32
Top stitch in place.

Step 11:  Layer the pillow top (right side down), then the two pillow back pieces (right sides up), with the raw edges of the back pieces matching up with the raw edges of the pillow top.  The folded/top stitched edges of the pillow backs should overlap somewhere in the middle of the pillow.
Christmas pillow tutorial 25Christmas pillow tutorial 17
Pin around the outside edge of the pillow.

Christmas pillow tutorial 26
Baste around the outside edge of pillow using 1/8” seam.  This will help to hold everything in place as you add the binding. 
Step 12:  Use the 2 (2.5” wide) strips of red fabric to create a binding.  Bind the pillow as you would a quilt.  For this pillow I machine stitched the binding to the front, folded it to the back and hand stitched it in place.

Insert the 18” pillow form.  Your pillow is all done! 
Christmas Pillow Tutorial by A Bright Corner

As an alternative, after it is quilted don’t add the pillow backing – just bind and use as a table topper! 

Christmas Pillow Tutorial by A Bright Corner 2


I want to thank Andy for stopping by today to share this festive pillow with us! You can find Andy:

2 comments:

Patricia said...

Very pretty pillow, thanks for the tutorial

Lee said...

I love this design! thanks!

Post a Comment